| TODAY IS. | | ![]() | LUNCH SPECIAL: |
SKINZ HELP |
|
START HERE // Before installing and peeling the skinz first clean the surface of the housing. Use a dab of windex or any cleaning product. Dip a piece of paper towel on the windex and clean surface. Dust or dirt on housing surface can weaken the adhesive on the vinyl. Do this and this will assure your skins to stay on longer.
TOOLS:
![]() 1). Peel clear top sticker along with the skinz, seperating it from the white backing paper. You should have the clear top sticker and the skinz as one piece.
![]() 2). Find a point of reference to line up with. Tiny holes or key buttons are sometimes a good start.
![]() 3). Progressively rub side to side of the Cellskin to assure it stays on. Use the credit card to assure there are "NO AIR TRAPPED". These will later on be a problem so try to rub those off before taking off the top clear top sticker.
![]() 4). After completing step three, rub throughout and then remove the clear top layer carefully. |
| SITE POWERED.BY | DIA.TRIBE | home | shipping rates | order status | housing installation help | contact us |